Brief

• Bi-Directional converter for Serial ATA and Parallel ATA. This Adapter Does-it-All, SATA Hard Drive to IDE Converter or IDE Hard Drive to SATA Host Converter.
• This is a bi-direction converter for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller.
• The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0.This converter supports 1.5GHz data rate.

• Jmicro JM20330 Chipset
• Plug & Play and Hot-swapping capability
  
• 150MB/s transfer rate
  
• Automatic SATA 3.0/1.5 Gbps speed negotiation
  
• Serial-ATA 1.0 specification compliant
  
• Support Serial ATA hot-plug
  
• Support ATA Host Bridge
  
• Support ATA PIO and UDMA modes 0 to 4
  
• ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
  
• ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
  
• Support 3.5” IDE hard drives and 5.25” optical drives
  
• Ultra low power consumption
  
• Work for both AC and DC couple between the transmitter and the receiver
  
• Provide specified OOB signal detection and transmission
  
• Support Spread Spectrum Clocking to reduce EMI
  
• Support Partial/Slumber power management
  
• Provide adjustable TX signal amplitude and pre-emphasis level
  
• Master/Slave mode support
  
• Support Windows 98SE/ME/2000/XP Operating System
  

• Includes Bi-directional Adaptor, SATA Cable, Power Cable, CD Driver, and User manual.